Description
Accessories for Installation of Saddle Matrices
High-Quality Stainless Steel Standard Ring to be used with Forceps.
Tines of the ring are narrowed.
WARNING!!!
When operating with ring:
1) make sure of the integrity of the ring and absence of rust on it;
2) avoid high-speed opening;
3) open the ring for not more than 10 - 12 mm width ;
4) open the ring for necessary width outside the mouth before placing it on a tooth.
CLEANING AND STERILISATION INSTRUCTIONS
Recommended to use Dry-heat sterilization process
1) Submerge instruments in cleaning agent solution with neutral pH for 20 min;
2) Rinse the instruments thoroughly with purified water for 3-5 min;
3) Perform standard moist heat/steam sterilization procedure following the sterilizer instructions
WARNING!!!
1) Do not use cleaning agents with a high percentage of chlorine and cleaners containing oxalic acid;
2) Do not keep instruments in liquid medium for more than 3 hours
 |
 |
| Tines of ring № 1.033 |
Tines of ring № 1.099 |
Three rings listed on this page are compatible with saddle matrices
INSTALLATION WITH SPRINGCLIP № 1.003
 |
Choose matrix of appropriate length and insert tines of springclip outside the patient mouth into the matrix side tubes |
 |
Install system onto the tooth. |
 |
Operating position on the mesial side. |