Description
Rings 2.167P & 2.167M are produced from nitinol (nickel titanium alloy)
NiTi Rings are characterized by: .
- optimal matching of the contour of the ring working part to the tooth surface.
- unique ability to return to its original shape after any opening.
- high clamping force throughout the service life
Works with Forceps number 1.099-3
WARNING!!!
When operating with ring:
1) make sure of the integrity of the ring and absence of rust on it;
2) avoid high-speed opening;
3) open the ring for not more than 10 - 12 mm width ;
4) open the ring for necessary width outside the mouth before placing it on a tooth.
CLEANING AND STERILISATION INSTRUCTIONS
Recommended to use Dry-heat sterilization process
1) Submerge instruments in cleaning agent solution with neutral pH for 20 min;
2) Rinse the instruments thoroughly with purified water for 3-5 min;
3) Perform standard moist heat/steam sterilization procedure following the sterilizer instructions
WARNING!!!
1) Do not use cleaning agents with a high percentage of chlorine and cleaners containing oxalic acid;
2) Do not keep instruments in liquid medium for more than 3 hours